LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 4.3L (On-Vehicle) >> Repair Instructions >> Drive Belt Idler Pulley Replacement - without Air Conditioning >> Installation Procedure

Installation Procedure

NOTE: Refer to FASTENER NOTICE .
  1. Install the belt idler pulley and the bolt to the power steering pump mounting bracket.

    Tighten 

    Tighten the bolt to 50 N.m (37 lb ft).

  2. Install the drive belt. Refer to Drive Belt Replacement .
    Fig 1: Drive Belt Idler Pulley (Without A/C)
    G01660969Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals