LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 4.3L (On-Vehicle) >> Repair Instructions >> Crankshaft Position (CKP) Reluctor Ring Replacement >> Removal Procedure

Removal Procedure

  1. Remove the engine front cover. Refer to Engine Front Cover Replacement .
  2. Remove the crankshaft position sensor reluctor ring.
    Fig 1: Crankshaft Position Sensor Reluctor Ring
    G01661192Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals