LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 4.3L (On-Vehicle) >> Repair Instructions >> Crankshaft Front Oil Seal Replacement >> Removal Procedure

Removal Procedure

  1. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
  2. Use a suitable prying tool to remove the crankshaft front oil seal.
  3. Inspect engine front cover seal bore area for damage.
  4. Inspect the crankshaft balancer seal area. Refer to CRANKSHAFT BALANCER CLEANING AND INSPECTION .
    Fig 1: Removing Crankshaft Front Oil Seal
    G01661184Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals