LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring Systems (General Information) >> Repair Instructions >> Relay Replacement (Attached To Wire Harness) >> Installation Procedure

Installation Procedure

  1. Connect the relay (1) to the wire harness connector (2).
  2. Install any connector position assurance (CPA) devices or secondary locks.
  3. Install the relay using any fasteners or tape that originally held the relay in place.
    Fig 1: Locating Relay Attached To Wire Harness
    G01840711Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals