LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Wiring Systems (General Information) >> Diagnostic Information & Procedures >> Push To Seat Connectors >> Reinstalling Terminal

Reinstalling Terminal

  1. In order to reuse a terminal or lead assembly. Refer to WIRING REPAIRS .
  2. Ensure that the cable seal is kept on the terminal side of the splice.
  3. Insert the lead from the back until it catches.
  4. Install the TPA, CPA and/or the secondary locks.
scientia non olet · About LEMON Manuals