LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Electrical >> Instrument Panel, Gauges & Console >> Repair Instructions >> IP Dimmer Switch Replacement >> Removal Procedure

Removal Procedure

  1. Ensure that the headlamp switch is OFF and that the ignition switch is in the LOCK position.
  2. Remove the instrument panel accessory trim plate. Refer to TRIM PLATE REPLACEMENT - IP ACCESSORY .
  3. Disconnect the electrical connector.
  4. Remove the screws that retain the headlamp switch panel to the instrument panel accessory trim plate.
  5. Remove the headlamp switch panel from the instrument panel accessory trim plate.
    Fig 1: Locating Headlamp Switch Panel
    G01842890Courtesy of GENERAL MOTORS CORP.