Removal Procedure

The axle vent assembly is on the right side of the axle carrier.

1. Raise and support the vehicle. Refer to LIFTING & JACKING THE VEHICLE in General Information.
2. Remove the vent clamp bolt.
   Fig 1: Removing Vent Clamp Bolt

   Courtesy of GENERAL MOTORS CORP.
3. Remove the hose from the axle vent tube.
   Fig 2: Removing Hose From Axle Vent Tube

   Courtesy of GENERAL MOTORS CORP.
4. Remove the hose from the frame.
5. Remove the vent assembly from the hose.
6. Remove the vent hanger clip from the vent hose.
7. Remove the hose clamp from the vent hose.
   Fig 3: Removing Vent Assembly, Vent Hanger Clip, Hose And Clamp

   Courtesy of GENERAL MOTORS CORP.