LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Drive Axle >> Repair Instructions >> Rear Axle Housing Cover and Gasket Replacement >> Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to LIFTING & JACKING THE VEHICLE in General Information.
  2. Drain the rear axle. Refer to Lubricant Change .
  3. Remove the rear axle housing cover bolts (1).
  4. Remove the rear axle housing cover (2) from the axle housing.
    1. Catch the oil in a drain pan.
    2. Remove any gasket material from the rear axle housing and/or the rear axle housing cover.
      Fig 1: Removing Rear Axle Housing Cover And Bolts From Axle Housing
      G01670926Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals