LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Drive Axle >> Repair Instructions >> Differential Side Bearings Replacement >> Removal Procedure

Removal Procedure

  1. Remove the differential from the rear axle housing. Refer to Differential Replacement .
  2. Remove the differential side bearings by doing the following:
    1. Install the J 22912-01  (2) onto the differential case.
    2. Install the J 8107-2  (1) onto the differential case bearing.
    3. Remove the differential side bearings using the J 22912-01  and a hydraulic press.
      Fig 1: Installing J 22912-01 Onto Differential Case And Installing J 8107-2 Onto Differential Case Bearing
      G01670958Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals