LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Drive Axle >> Repair Instructions >> Axle Vibration Damper Replacement >> Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to LIFTING & JACKING THE VEHICLE in General Information.
  2. Remove the front dampener nut from the frame mount bracket.
  3. Remove the rear dampener bolt and the nut from the axle mount bracket.
  4. Remove the axle vibration dampener.
    Fig 1: Removing Axle Vibration Dampener
    G01670917Courtesy of GENERAL MOTORS CORP.
  5. Remove the dampener frame mount bracket (if necessary).
    Fig 2: Removing Dampener Frame Mount Bracket
    G01670918Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals