Axle Assembly Specifications
AXLE ASSEMBLY SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| Ring Gear Backlash | ||
| Preferred | .005-.007 (.13-.18) | |
| Allowed | .003-.010 (.08-.25) | |
| Ring Gear Runout (Maximum) | .002 (.05) | |
| INCH Lbs. (N.m) | ||
| Pinion Bearing Preload (New Bearing) | 15-30 (1.7-3.4) | |
| Pinion Bearing Preload (Used Bearing) | 10-20 (1.1-2.3) | |
| Pinion and Differential Case Bearing Preload, New Bearings | 30-55 (3.4-6.2) | |
| Pinion and Differential Case Bearing Preload, Used Bearings | 25-45 (2.8-5.1) | |