LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Door Inner Panel Replacement - Rear Side >> Removal Procedure

Removal Procedure

  1. Remove the screws that retain the front trim molding to the door.
  2. Remove the trim molding from the door.
  3. Use the J 38778  in order to remove the rear trim moldings.
  4. Remove the retainers from the rear trim molding.
    Fig 1: Removing Screws That Retain Front Trim Molding To Door - Rear Side
    G01841562Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals