LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Repair Instructions >> Seat Replacement - Rear (2-Door Utility) >> Removal Procedure

Removal Procedure

IMPORTANT: Remove the passenger side seat before removing the driver side seat.
  1. Remove the seat leg trim covers.
    Fig 1: Locating Seat Leg Trim Covers
    G01843107Courtesy of GENERAL MOTORS CORP.
  2. Tilt the seat back slightly forward in order to remove the seat leg nuts.
    Fig 2: Locating Seat Leg Nuts
    G01843108Courtesy of GENERAL MOTORS CORP.
  3. Fold the seat in order to remove the rear seat nuts.
  4. Remove the seat from the vehicle.
scientia non olet · About LEMON Manuals