Installation Procedure

Install the seat back to the lower frame.
NOTE: Refer to FASTENER NOTICE in GM VEHICLES CAUTIONS & NOTICES article.
Install the seat back pivot bolt.
Tighten

Tighten the seat back pivot bolt to 47 N.m (35 lb ft).

Fig 1: Locating Seat Back Pivot Bolt
Courtesy of GENERAL MOTORS CORP.
Install the recliner assembly. Refer to SEAT BACK RECLINER REPLACEMENT - FRONT .
Install the seat to the vehicle. Refer to SEAT REPLACEMENT - BUCKET or SEAT REPLACEMENT - BENCH .