LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Repair Instructions >> Trim Replacement - Third Pillar (4-Door Utility) >> Removal Procedure

Removal Procedure

  1. Remove the rear door sill trim plate. Refer to DOOR SILL PLATE REPLACEMENT .
  2. Remove the lower rear seat belt bolt.
  3. Remove the body side lower trim panel from the vehicle.
    Fig 1: Locating Third Pillar Trim (4-Door Utility)
    G01841768Courtesy of GENERAL MOTORS CORP.