LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Repair Instructions >> Wheel Opening Flare Replacement - Rear (All Except XTREME) >> Removal Procedure

Removal Procedure

  1. Remove the wheel house panel access plugs.
  2. Remove the nuts that retain the panel to the flare.
    Fig 1: Wheel Opening Flare - Rear (All Except Xtreme)
    G01841220Courtesy of GENERAL MOTORS CORP.
  3. Remove the screws that retain the flare to the panel.
  4. Remove the flare from the panel.
scientia non olet · About LEMON Manuals