LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Repair Instructions >> Wheel Opening Flare Replacement - Front (XTREME) >> Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in GENERAL INFORMATION.
  2. Remove the screws that retain the wheel flare to the vehicle.
    Fig 1: Front Wheel Flare-To-Vehicle Screws (Xtreme)
    G01841186Courtesy of GENERAL MOTORS CORP.
  3. Cut the 2-way adhesive that retains the flare to the fender.
  4. Remove the flare from the vehicle.
  5. Remove the 2-way adhesive.
scientia non olet · About LEMON Manuals