LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Repair Instructions >> Retaining Plate Replacement - Rocker Panel (XTREME) >> Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in GENERAL INFORMATION.
  2. Remove the rocker molding.
  3. Drill out the rivets using a 1/4 inch drill bit.
  4. Clean the anti-corrosion chemical using a suitable degreaser.
    Fig 1: Rocker Panel Retaining Plate (Xtreme)
    G01841230Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals