LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Repair Instructions >> Retaining Plate Replacement - Rocker Panel (Blazer) >> Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in GENERAL INFORMATION.
  2. Remove the front fender lower cladding.
  3. Remove the rocker panel molding. Refer to MOLDING REPLACEMENT - ROCKER PANEL (XTREME)  or MOLDING REPLACEMENT - ROCKER PANEL (BLAZER)  or MOLDING REPLACEMENT - ROCKER PANEL (JIMMY) .
  4. Drill out the rivets using a 1/4 inch drill bit.
  5. Remove the retaining plate.
    Fig 1: Rocker Panel Retaining Plate (Xtreme)
    G01841232Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals