LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Repair Instructions >> Molding Replacement - Rear Wheel Opening (Pickup) >> Removal Procedure

Removal Procedure

  1. Remove the 9 screws that secure the rear wheel opening molding to the pickup box side panel.
  2. Remove the rear wheel opening molding.
    Fig 1: Rear Wheel Opening Molding (Pickup)
    G01841214Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals