LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Repair Instructions >> Molding Replacement - Front Wheel Opening (CHEVROLET) >> Removal Procedure

Removal Procedure

  1. Remove the screws that retain the molding to the fender.
  2. Remove the molding from the fender.
    Fig 1: Molding-To-Fender Retaining Screws (Chevrolet)
    G01841184Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals