LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Repair Instructions >> Molding Replacement - Body Side Roof Drip >> Removal Procedure

Removal Procedure

  1. Pull the roof drip weatherstrip from the door opening frame.
  2. Remove any remaining weatherstrip material or adhesive.
    Fig 1: Body Side Roof Drip Molding
    G01841240Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals