LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Repair Instructions >> Decal & Stripe Replacement >> Removal Procedure

Removal Procedure

  1. Remove the necessary molding or trim panel.
  2. Remove the molding attaching clips, handles, sidemarker reflector, and/or other stripe or decal overlapping parts.
  3. Wash and clean repair surfaces, adjacent panel, and openings as required.
    NOTE: To avoid damaging the paint finish, do not use pointed or sharp instruments to remove the stripe or the decal.
  4. Remove the stripe or decal from body panel using 3M® Scotch Brite Molding Adhesive Remover, disk 3M® P/N 07502 or equivalent.
    NOTE: Use of harsh chemicals when cleaning can damage exterior lamps. Suggested cleaners are a mild soap and water, or Varnish Makers and Painters (VM & P) Naptha. VM & P Naptha is a specific type of naptha and should not be substituted by any other naptha.
  5. Remove all traces of adhesive residue from painted surfaces with a Varnish Makers and Painters (VM & P) naphtha.
scientia non olet · About LEMON Manuals