LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumper System >> Repair Instructions >> Step Pad Replacement - Rear Bumper (Utility) >> Installation Procedure

Installation Procedure

Install the step pads to the bumper by pressing firmly until the step pads lock into position.

Fig 1: Locating Rear Bumper Step Pad Components (Utility)
G01841360Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals