LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumper System >> Repair Instructions >> Step Pad Replacement - Rear Bumper (Pickup) >> Removal Procedure

Removal Procedure

  1. Use a flat-bladed tool in order to pry the step pads upward.
    Fig 1: Removing Rear Bumper Step Pad (Pickup)
    G01841355Courtesy of GENERAL MOTORS CORP.
  2. Remove the step pads from the bumper.
    Fig 2: Locating Rear Bumper Step Pad Components (Pickup)
    G01841356Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals