LEMON Manuals: Even more car manuals for everyone

Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumper System >> Repair Instructions >> Step Pad Replacement - Rear Bumper (Pickup) >> Installation Procedure

Installation Procedure

Install the step pads to the bumper by pressing the step pads firmly into position.

Fig 1: Locating Rear Bumper Step Pad Components (Pickup)

G01841357

Courtesy of GENERAL MOTORS CORP.

scientia non olet · About LEMON Manuals