LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumper System >> Repair Instructions >> Impact Bar Replacement - Rear Bumper (Utility) >> Removal Procedure

Removal Procedure

  1. Remove the rear bumper step pads. Refer to STEP PAD REPLACEMENT - REAR BUMPER (PICKUP)  or STEP PAD REPLACEMENT - REAR BUMPER (UTILITY) .
  2. Remove the license plate lamps. Refer to LICENSE LAMP REPLACEMENT (W/ STEP BUMPER) , LICENSE LAMP REPLACEMENT (W/O STEP BUMPER) or LICENSE LAMP REPLACEMENT (FILLER PANEL) in EXTERIOR LIGHTS article.
  3. Remove the nuts and the bolts that retain the rear bumper impact bar to the bumper bracket.
    Fig 1: Locating Rear Bumper Impact Bar Components (Utility)
    G01841353Courtesy of GENERAL MOTORS CORP.
  4. Remove the rear bumper impact bar from the vehicle.
scientia non olet · About LEMON Manuals