LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumper System >> Repair Instructions >> Fascia Replacement - Rear Bumper >> Removal Procedure

Removal Procedure

  1. Remove the license lamps. Refer to LICENSE LAMP REPLACEMENT (W/ STEP BUMPER) , LICENSE LAMP REPLACEMENT (W/O STEP BUMPER) or LICENSE LAMP REPLACEMENT (FILLER PANEL) in EXTERIOR LIGHTS article.
  2. Remove all of the step pads from the bumper.
    Fig 1: Locating Rear Bumper Fascia
    G01841349Courtesy of GENERAL MOTORS CORP.
  3. Remove the clips securing the fascia at the bottom of the impact bar.
  4. Remove the fascia.
scientia non olet · About LEMON Manuals