LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumper System >> Repair Instructions >> Bumper Filler Replacement >> Removal Procedure

Removal Procedure

  1. Remove the filler strip adhesive ends from the bumper.
  2. Pry the filler strips retaining tabs from the bumper.
    Fig 1: Locating Filler Strips Retaining Tabs
    G01841337Courtesy of GENERAL MOTORS CORP.
  3. Remove the bumper filler strip.
scientia non olet · About LEMON Manuals