LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumper System >> Repair Instructions >> Bumper Filler Replacement >> Installation Procedure

Installation Procedure

  1. Remove the tabs from the filler strip adhesive strips.
  2. Press the filler strip retaining tabs into the bumper slots.
    Fig 1: Locating Filler Strips Retaining Tabs
    G01841338Courtesy of GENERAL MOTORS CORP.
  3. Press the adhesive ends down onto the bumper.
scientia non olet · About LEMON Manuals