LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumper System >> Repair Instructions >> Bracket Replacement - Rear Bumper (Pickup) >> Removal Procedure

Removal Procedure

  1. Remove the rear bumper impact bar. Refer to IMPACT BAR REPLACEMENT - REAR BUMPER (PICKUP)  or IMPACT BAR REPLACEMENT - REAR BUMPER (UTILITY) .
  2. Remove the bolt securing the rear step brace to the rear bumper bracket, if equipped.
  3. Remove 3 nuts and bolts securing the rear bumper bracket to each frame rail.
  4. Remove the rear bumper bracket from the frame rail.
Fig 1: Locating Rear Bumper Bracket (Pickup)
G01841365Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals