LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Weatherstrip Replacement - Lift Gate >> Removal Procedure

Removal Procedure

  1. Open the endgate or the liftgate.
  2. Remove the weather-strip molding from the pinch-weld flange.
  3. Firmly grip the weather-strip.
  4. Pull the weather-strip out and away from the vehicle.
    5. Fig 1: Locating Lift Gate Weatherstrip
    G01841945Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals