LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Weatherstrip Replacement - End Gate >> Removal Procedure

Removal Procedure

In order to remove the liftgate window weather-strip from the pinch-weld flange, perform the following steps:

  1. Open the liftgate window.
  2. Firmly grip the weather-strip.
  3. Pull the weather-strip.
    4. Fig 1: Locating End Gate Weatherstrip
    G01841943Courtesy of GENERAL MOTORS CORP.

scientia non olet · About LEMON Manuals