LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Weatherstrip Replacement - End Gate Window >> Removal Procedure

Removal Procedure

  1. Open the endgate.
  2. Starting at the corner of the endgate flange, pull the weatherstrip molding from the endgate.
    3. Fig 1: Locating End Gate Window Weatherstrip
    G01841947Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals