LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Support Cable Replacement - End Gate (Pickup) >> Removal Procedure

Removal Procedure

  1. Safely support the endgate in the open position.
  2. Remove the bolts that retain the endgate supports to the endgate.
    Fig 1: Locating Endgate Support Cable Components (Pickup)
    G01841863Courtesy of GENERAL MOTORS CORP.
  3. Remove the endgate supports from the vehicle.
scientia non olet · About LEMON Manuals