LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Pressure Relief Valve Replacement (Pickup) >> Removal Procedure

Removal Procedure

  1. Remove the pickup box. Refer to PICKUP BOX REPLACEMENT .
  2. Remove the pressure relief ventilation valve assembly.

    Use a flat bladed tool in order to pry the valve out of the rear of the cab.

    Fig 1: Locating Pressure Relief Valve (Pickup)
    G01841937Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals