LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> PULLSTRAP Replacement - Lift Gate >> Removal Procedure

Removal Procedure

  1. Remove the screw that retains the liftgate assist handle to the liftgate trim panel.
    Fig 1: Locating Liftgate Assist Handle
    G01841812Courtesy of GENERAL MOTORS CORP.
  2. Carefully pry at the edge of the liftgate assist handle in order to remove the liftgate assist handle from the liftgate trim panel.
scientia non olet · About LEMON Manuals