LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Lock Cylinder Replacement - Lift Gate >> Removal Procedure

Removal Procedure

  1. Remove the liftgate window latch support. Refer to LATCH SUPPORT REPLACEMENT - LIFT GATE WINDOW .
  2. Disconnect the electrical connectors, as needed.
  3. Remove the clip that retains the liftgate lock cylinder to the liftgate.
  4. Remove the liftgate lock cylinder from the liftgate.
    Fig 1: Locating Liftgate Lock Cylinder Components
    G01841857Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals