LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Lock Cylinder Replacement - Lift Gate >> Installation Procedure

Installation Procedure

  1. Install the liftgate lock cylinder to the liftgate.
  2. Install the clip that retains the liftgate lock cylinder to the liftgate.
  3. Connect the electrical connectors, as needed.
  4. Install the liftgate window latch support. Refer to LATCH SUPPORT REPLACEMENT - LIFT GATE WINDOW .
    Fig 1: Locating Liftgate Lock Cylinder Components
    G01841858Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals