LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Lift Gate Applique Replacement >> Removal Procedure

Removal Procedure

  1. Open the liftgate.
  2. Remove the screw that retains the liftgate quarter upper applique to the liftgate.
  3. Close the liftgate.
  4. Slide the applique upward in order to release the applique from the liftgate.
  5. Remove the liftgate quarter upper applique from the liftgate.
    Fig 1: Locating Lift Gate Applique
    G01841820Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals