LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> End Gate Adjustment >> Removal Procedure

Removal Procedure

  1. Open the endgate or the liftgate.
  2. Remove the rubber bumper.
    Fig 1: Identifying Endgate Bumper
    G01841824Courtesy of GENERAL MOTORS CORP.
  3. Turn the cargo net button counterclockwise in order to remove the cargo net button.
  4. Rotate the bumper clockwise or counterclockwise in order to adjust the bumper.
  5. Reinstall the bumper before checking the adjustment. The endgate or the liftgate should seal completely with a minimum of closing effort.
  6. Apply a drop of liquid thread adhesive GM P/N 12345382 (Canadian P/N 10953489) or the equivalent to the bumper threads.
scientia non olet · About LEMON Manuals