LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> End Gate Adjustment >> Installation Procedure

Installation Procedure

NOTE: Refer to FASTENER NOTICE in GM VEHICLES CAUTIONS & NOTICES article.
  1. Install the cargo net button.

    Tighten 

    Tighten the cargo net button to 2 N.m (18 lb in).

  2. Install the rubber bumper.
    Fig 1: Identifying Endgate Bumper
    G01841825Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals