LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Rear End >> Repair Instructions >> Bumper Replacement - End Gate (Pickup) >> Installation Procedure

Installation Procedure

  1. Insert a blunt object into the recessed areas of the bumper.
  2. Press the blunt object forward in order to seat the retainers.
    Fig 1: Locating End Gate Bumper (Pickup)
    G01841890Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals