LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Front End >> Repair Instructions >> Seal Replacement - Hood Front >> Removal Procedure

Removal Procedure

  1. Use a flat-bladed tool in order to carefully pry the seal assembly away from the flange.
  2. Remove the seal from the hood.
    Fig 1: Locating Front Hood Seal Assembly
    G01841426Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals