LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Front End >> Repair Instructions >> Seal Replacement - Hood Front >> Installation Procedure

Installation Procedure

  1. Position the seal assembly to the hood.
  2. Press the seal assembly into place until fully seated.
    Fig 1: Locating Front Hood Seal Assembly
    G01841427Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals