LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Front End >> Repair Instructions >> Hood Pop-Up Spring Replacement >> Removal Procedure

Removal Procedure

  1. Use a flat-bladed tool in order to push in the hood mounted end of the spring in order to release the retainers.
  2. Remove the spring from the hood.
    Fig 1: Locating Hood Pop-Up Spring
    G01841394Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals