LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Front End >> Repair Instructions >> Hood Pop-Up Spring Replacement >> Installation Procedure

Installation Procedure

  1. Install the spring to the hood.
  2. Insert the spring into the hood retainers.
    Fig 1: Locating Hood Pop-Up Spring
    G01841395Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals