LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Front End >> Repair Instructions >> Hood Hold-Open Rod Replacement >> Removal Procedure

Removal Procedure

  1. Raise the hood. Support the hood with something other than the prop rod.
  2. Remove the prop rod from the retainers.

    Pull the bottom of the rod toward you in order to release the rod from the bottom retainer.

    Fig 1: Locating Hood Prop Rod Components
    G01841398Courtesy of GENERAL MOTORS CORP.
  3. Remove the retainers from the radiator support.
scientia non olet · About LEMON Manuals