LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Front End >> Repair Instructions >> Hood Bumper Replacement >> Installation Procedure

Installation Procedure

  1. Install the side hood bumper by pushing down and sliding the side hood bumper (2) rearward.
    Fig 1: Locating Side Hood Bumper
    G01841373Courtesy of GENERAL MOTORS CORP.
  2. Install the front hood bumper (1) by turning the front hood bumper in clockwise until the hood closes flush with the fender.
scientia non olet · About LEMON Manuals