LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System And Washer System >> Repair Instructions >> Wiper Blade Element Replacement >> Installation Procedure

Installation Procedure

IMPORTANT: Keep the wiper blade claws in the rubber claw channel of the wiper blade element. Do not allow the claws of the wiper blade to contact the metal spline of the wiper blade element.
  1. Insert the open end of the wiper blade element (3) into the bottom claws of the wiper blade (2).
  2. Guide the wiper blade element (3) through the wiper blade (1) claw sets.
    Fig 1: Identifying Wiper Blade Element
    G01840912Courtesy of GENERAL MOTORS CORP.
  3. Engage the bottom claw (2) of the wiper blade (1) into the notches in wiper blade element (3).
  4. Install the wiper blade onto the wiper arm. Refer to WIPER ARM BLADE REPLACEMENT .
scientia non olet · About LEMON Manuals